What is permanent holiday lighting?

Permanent holiday lighting is a fixed outdoor LED lighting system installed under your roofline that stays in place year-round. Using RGBW (color-changing) LEDs controlled by a smartphone app, you can display any color, pattern, or animated effect for any occasion — Christmas, Halloween, Fourth of July, game days, or everyday ambient lighting. No more climbing ladders every December.

Can I control the lights from my phone?

Yes. All permanent RGBW systems we install are fully app-controlled via smartphone. You can choose colors, animations, brightness, and set automated schedules. Alexa and Google Home voice control is also supported on most systems.

Does permanent holiday lighting require HOA approval in DFW?

Some DFW HOAs require approval for permanent exterior modifications. We recommend submitting for HOA approval before installation. The hardware is subtle when off — typically small low-profile channel track under the roofline — and most HOAs have no objection once they understand the aesthetics.

How long do permanent holiday lights last?

Quality RGBW permanent holiday lighting systems use commercial-grade LED components rated for 50,000+ hours. In DFW conditions (heat, UV, storms), a quality installation typically lasts 7–10+ years with minimal maintenance. We use systems specifically tested for Texas weather conditions.

Permanent Holiday Lighting in DFW - Bernardy Lighting LLC

Q: How much does permanent holiday lighting cost in DFW?

Most residential permanent holiday lighting systems in DFW run $1,200–$3,500 installed, depending on the linear footage of roofline covered. A typical single-story home with standard coverage is usually $1,500–$2,200. Two-story or large estate homes run higher. The system pays for itself versus annual rental in 2–3 years.

The Complete DFW Resource

Permanent Holiday Lighting in DFW: The Complete Guide (2026)

Everything DFW homeowners need to know about permanent RGBW LED lighting — how it works, what it costs, and why thousands of Texas homeowners are making the switch.

Get a Free Quote

The End of the Annual Holiday Lighting Hassle

Project pricing is quoted for the current scope, equipment, access, and site conditions. New installation projects generally begin at $2,000.

Permanent RGBW LED lighting systems are changing that entirely. Install them once, control everything from an app, and never hang lights again. No ladders, no storage bins, no annual service fee — and unlike temporary systems, permanent lighting works for every holiday, every season, all year long.

This guide covers everything you need to know about permanent holiday lighting in DFW — how the technology works, what the installation process looks like, what things cost, and how to evaluate whether it’s right for your home.

What Is Permanent RGBW Holiday Lighting?

RGBW stands for Red, Green, Blue, White — the four color channels in each LED node. Each node in a permanent lighting system can produce millions of color combinations by mixing these four channels. The result: full-spectrum color control from a single small fixture installed permanently along your roofline.

The system consists of three main components: the LED nodes (mounted along your eaves and roofline), the wiring and waterproof connectors that run the nodes, and a controller box that connects to your home’s wifi and lets you control everything from a smartphone app.

Once installed, the hardware stays in place permanently. The LED nodes are small, low-profile, and nearly invisible during the day — most people don’t notice them unless they’re looking. At night, a tap on your phone transforms your home into whatever look you’re going for.

What Can You Do With an RGBW System?

The flexibility of a permanent RGBW system goes far beyond Christmas lighting. Here’s what DFW homeowners are using them for:

Christmas: Red and green, white and gold, multi-color with chasing animations — whatever you want
Halloween: Orange and purple, with flickering effects
Fourth of July: Red, white, and blue — patriotic and ready instantly
Dallas Cowboys game day: Navy blue and silver — your whole block knows where you stand
Valentine’s Day: Pink and red
St. Patrick’s Day: Green
Year-round warm white: Elegant soft white that looks like permanent architectural lighting
Party / entertaining mode: Colorful animations and scenes for outdoor events
Off mode: Completely invisible during the day

The Permanent vs. Rental Math

Project pricing is quoted for the current scope, equipment, access, and site conditions. New installation projects generally begin at $2,000.

The Installation Process

Installing a permanent RGBW system is a one-day job for most DFW homes. Here’s how it works:

Measurement & Quote

We measure your roofline and eave runs, calculate the number of nodes needed, and provide a detailed quote. Most DFW homes range from 80–200 linear feet of roofline.

Node Mounting

LED nodes are mounted along the eave edge, typically under the fascia or in the channel where your gutters meet the roofline. Spacing is typically every 4–6 inches for a full pixel-density look.

Wiring & Controller

Wiring runs are concealed as much as possible. The controller box is mounted in a protected location — typically in the garage or on an exterior wall — and connects to your home wifi.

App Setup & Walkthrough

We set up the app on your phone, walk you through the controls, create a few starter scenes, and make sure everything is working perfectly before we leave.

Built for Texas Weather

Permanent holiday lighting systems must survive DFW’s climate extremes — 110°F summers, UV exposure, occasional ice storms, and everything in between. System components and environmental ratings are selected for the application and identified in the proposal.

Lower-quality systems sold by some installers use consumer-grade components that degrade quickly in Texas conditions. We use systems that carry multi-year warranties and are specifically rated for extreme outdoor environments.

HOA Considerations in DFW

Many DFW communities — particularly in Frisco, Plano, Flower Mound, Southlake, and Westlake — are governed by HOAs with architectural guidelines. Most HOAs allow permanent lighting systems, but we always recommend confirming with your specific HOA before installation.

During the day, the nodes are small and low-profile — typically less conspicuous than gutters or standard architectural trim. HOA rules vary, and property owners should confirm approval before exterior modifications.

Frequently Asked Questions

How much does permanent holiday lighting cost in DFW?

Project pricing is quoted for the current scope, equipment, access, and site conditions. New installation projects generally begin at $2,000.

Can multiple family members control the lights?

Yes. The app can be installed on multiple phones and users can be added to the account. Schedules and scenes created by one user are visible to all.

What happens if a node fails?

Individual nodes can be replaced without removing the entire system. The nodes are designed to be serviceable — we carry replacement stock for the systems we install and can address failures quickly.

How much will it add to my electricity bill?

Project pricing is quoted for the current scope, equipment, access, and site conditions. New installation projects generally begin at $2,000.

Do the lights look obvious during the day?

No. The nodes are small — roughly the size of a large marble — and installed flush with the roofline. When off, they’re virtually invisible from the street. Most visitors to homes with permanent lighting don’t notice the hardware until they see the lights on at night.

Related Resources

Ready to Install Permanent Holiday Lighting?

Free quote. One installation. Works every holiday, every season, from your phone. Serving all of DFW.

Get a Free Quote Call (817) 542-6445